Sale!

Garrett Ace 250

Original price was: $249.00.Current price is: $212.94.

Garrett Ace 250 options

Clear

Garrett Ace 250

With the introduction of the similiar Ace 300, the Ace 250 is now a special order item.

Key Features:

Electronic Pinpointing: to precisely locate target and speed recovery
Accept/Reject Discrimination: to modify discrimination patterns

Five Search Modes: select from these pre-set discrimination patterns or create your own!
- All Metal (Zero)
- Jewelry
- Custom
- Relics
- Coins
- Pinpoint
Continuous Coin Depth Indicator: to determine target depth
Battery Condition Indicator: shows battery life continually
Interchangeable ACE series searchcoils: are available
Expanded Target ID Legend: easy-to-read above large LCD screen
Pushbutton Controls: with One-Touch operation
Other features: 3-piece travel/storage, disassembles to 24″; adjustable
arm cuff; quarter-inch (1/4″) size headphone jack.

Technical Specifications:

Target ID Cursor Segments		12
Iron Discrimination Segments		2
Accept/Reject Discrimination		YES
Search Modes		5 (plus Pinpoint)
Sensitivity/Depth Adjustments		8
Electronic Pinpointing		YES
Frequency		6.5 kHz
Audio Tone ID Levels		3
Standard Searchcoil		6.5″ x 9″ PROformance
Length (Adjustable)		42″ to 51″ (1.06m – 1.29m)
Total Weight		2.7 lbs. (1.2 kgs.)
Batteries		4 AA (included)
Warranty		2 Year, Limited Parts/Labor

Pinpointing with the ACE 250

Pinpointing with the ACE 250 Pinpointing is one of the most important, but simple to learn, techniques you need when treasure hunting.

Knowing how to pinpoint correctly can mean the difference between digging a six-inch hole or a 2-inch plug.

Using the Pinpoint Mode (ACE 250)

The ACE 250 is equipped with an electronic Pinpoint pushbutton that makes pinpointing more accurate. Using this Pinpoint Mode is simple to do. After detecting a target, place the searchcoil on the ground to the side of the target’s suspected location. Now, press and hold the Pinpoint pushbutton while maintaining contact with the ground and slowly move your searchcoil from left to right and then front to back over the suspected target’s location. The maximum sound will be heard when the target is directly beneath the center of the searchcoil as shown.

Also, while electronically pinpointing, the Upper Scale on the LCD indicates signal strength. When the greatest number of LCD segments (increasing left to right on the scale) is shown, the center of the searchcoil is directly over the target.

NOTE: Keeping the searchcoil on the ground will help ensure the distance between the coil and the ground remains constant throughout the pinpointing process; in this case the distance is zero inches. If the terrain does not allow for this type of “coil scrubbing” then do your best to maintain a constant height between the coil and the ground.

Pinpointing Shallow or Irregular Targets (ACE 250)

Very shallow targets may
pinpoint under tip of inner coil

The pinpoint location is almost always in the center of the coil. In other words, a target pinpointed with an ACE 250 will be directly beneath the center of the searchcoil (See Using the Pinpoint Mode). However, exceptions to this rule may occur for oddly shaped iron targets, such as a nail or piece of wire lying horizontally in the ground; flat objects on edge; or, even a very shallow coin. In cases such as these, the pinpoint location may be closer to the front of the inner coil as shown here.

By carefully paying attention to the audio signals (and the Upper Scale indication on the 250) you’ll quickly become familiar with how your ACE pinpoints deep and shallow targets.

Shop All

Account

Need Support?

New

Shop

Search

Specials

Menu

Garrett Ace 250